Altamira Tecnologia

  • Increase font size
  • Default font size
  • Decrease font size


Mando

E-mail Print PDF

 

MANDO 301 AtoN AIS

 

Enabling AtoN through AIS technology

MANDO-301/303 is an Aids to Navigation (AIS) Act that provides accurate, real-time information for nearby ships and ground stations. MANDO-301 is a Type 1, and MANDO-303 is a Type 3 model.

Meteorological and Hydrological Support

The MANDO series avoids collisions by the transmission position of a correction or a floating AtoN. Has the ability to transmit meteorological and hydrological data with additional data Sensors installed.

 

Range extension through chaining

MANDO has been designed with cutting-edge technologies to offer many possibilities with ease of integration. As a first class, MANDO-303 supports threading functions that have been approved by BSH. To extend the transmission range, the feature has the ability to chain multiple units to cover an area and definitely brings flexibilities in implementations.

APLICAÇÕES

Flashlight
Buoy
Offshore Platform
Lighthouse

 MAIN CHARACTERISTICS

· Fully compliant with IALA, IEC and ITU standards

· Support chaining and RATDMA (MANDO-303 only)

· Able to repeat SART, 6, 8 messages (MANDO-303 only)

· Support remote configuration control (MANDO-303 only)

· Support for synthetic and virtual transmissions

· Easy-to-use window delivery for configuration tool

· Support messages 21, 6, 7, 8, 12, 13, 14, 25 (Depending on your hardware and software configuration)

· Meteorological and hydrological support Message (Message 8)

· Very low power consumption

· Slim PCB module to integrate with flashlight

· Optional extension I / O cards available

· Robust Housing (IP67)

· Flexibility of custom design upon request

SPECIFICATIONS:

APPLICABLE STANDARDS

IALA A-126 
IEC 60945 
IEC 61108-1 / 2 
IEC 61162-1 
IEC 62320-2 
ITU-R M.1371-3

 

TRANSMITTER PERFORMANCE

Frequency Range TX 156.025 MHz ~ 162.025 MHz Frequency 
Accuracy ± 500 Hz 
Channel Space 25 KHz 
Channel 
Protection 1 sec max. In-air Modulation GMSK / FM Data Rate 9,600 bps 
Power Management TX 2/5 / 12.5 Watt (Programmable) 
Port Power Error ± 1.5 dB (normal) 
Nominal Impedance 50Ω

 

GPS RECEIVER

Channel 
reception 
50 channels Tracking and Navigation Sensitivity 0-159 dBm Request Sensitivity 0-159 dBm 
Horizontal Position <2.5 m Autonomous <2.0 m SBAS 
Receiver Type SBAS: WAAS, EGNOS MSAS, GAGAN

RECEIVER PERFORMANCE (MANDO-303 only)

Number of receivers 2 Frequency 
range RX 156.025 MHz @ 162.025 MHz 
PER 20% sensitivity at -107 dBm 
Data rate 9,600 bps 
BY 20% at -107 dBm 
Rejection Co-channel 10 dB at 1 KHz offset 
Adjacent channel rejection70 dB at 25 KHz 
Nominal Impedance 50Ω

OF ENVIRONMENT

Operating temperature -20 ° C ~ +55 ° C 
Storage temperature 0 to ~ + 70 ° 
Humidity 95% relative humidity at 40 ° C

 

ENTRANCE EXIT

1) One RS-232 port for configuration 
2) One RS-232 port for communication 
3) One isolated control output - NC relay for alarm Indication (standard) or other control uses 
4) One isolated status input channel with 5 MA constant Current collector for external device status input (eg readout fault, light on / off, etc.) 
5) Four ADC channels for external sensors 
6) More extra I / O interfaces can be provided Through the optional extension I / O board

 

 

POWER CONSUMPTION @ 12VDC

MANDATE-301 FATDMA <0.288 Ah / day * 
MANDATE-303 FATDMA <0.432 Ah / day * 
RATDMA <1.656 Ah / day *

* At 12.5W; Programmed transmission every 3 minutes

 

Note: Specifications are subject to change without notice.